OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E1

Third Row Right Seat Belt Pretensioner B Deployment Control

On the right seat of the third row, B00E1 stands for a B-stage tensioner whose firing loop shows an open, a short or an out-of-window resistance. In no public service document does a manufacturer use B00E1. Where Mercedes-Benz fits a right third-row tensioner, it is the retractor, and the airbag unit reports it as B00E6 (LI54.21-P-070658, versions of March and June 2020). A B stage there would be a buckle or anchor device; NHTSA's 2013 study of pretensioners explains how a buckle unit drags the buckle down by a cable when its charge fires, and GM lists buckle, retractor and anchor units as the three possible types. Expect a lit airbag lamp and no tensioning from this stage until the loop is repaired.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E1

Possible causes

  • Connector of the right third-row buckle or anchor tensioner not fully seated high
  • Wiring under the cargo floor or side trim pinched or damaged by loads medium
  • Raised contact resistance at the airbag module plug low
  • Defective squib inside the tensioner low

Symptoms

  • Airbag lamp on in the instrument cluster
  • Occupant at the right of the third row gets no B-stage tensioning
  • Safety note: the tensioner contains a pyrotechnic charge; only work on it de-energised (battery off, wait time) and leave it to a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication