OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00E0

Third Row Left Seat Belt Pretensioner B Deployment Control

B00E0 points to a second pretensioner stage (B) on the left seat of the third row. Such a stage would be an extra device next to the retractor, typically a lap or anchor tensioner that pulls on the lower belt end. No carmaker publishes B00E0. Mercedes-Benz, which does fit third-row tensioners (the 2017 GLS manual lists them for every third-row belt), logs the left third-row retractor under B00E7 in topic LI54.21-P-070658, i.e. on the C slot, and never names a B stage back there. GM describes anchor units only for front seats, and Joyson pairs its lap pretensioner with a retractor unit against submarining. A stored code lights the airbag lamp; the stage is treated as not available.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / E0

Possible causes

  • Plug of the lap or anchor tensioner at the left third-row seat loose, unlatched or corroded high
  • Lead strained or chafed by folding and stowing the third-row seat medium
  • Airbag module coded for a B stage the vehicle does not have (after module or seat replacement) medium
  • Internal open or short in the tensioner squib low

Symptoms

  • Airbag warning lamp lit
  • Lap belt at the left third-row seat may not be pulled tight in a crash
  • Safety note: pyrotechnic part – work only with the battery disconnected and the wait time observed, preferably at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00E0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication