OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00D4

Restraint System Malfunction Audible Indicator

B00D4 concerns the audible restraint warning, the tone that stands in when a fault cannot be shown by the lamp. Ford's 2014 F-150 manual describes it: system readiness is signalled by the warning light, or by a backup tone if the light is out, and a problem announces itself as five beeps in a row, repeated until the fault and the lamp are put right. Audi's 1986 patent explains why such a fallback exists: a blown fuse could kill both the airbag module and its lamp, so the driver would believe the system was fine; it mentions an audible alarm as an alternative signal. No carmaker publishes B00D4. A stored code means the restraint module sees a fault in its chime or speaker path, so a later lamp failure could go wholly unannounced.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / D4

Possible causes

  • Open or shorted lead to the chime or speaker used for restraint warnings medium
  • Chime module or cluster speaker failed medium
  • Tone request from the restraint module not received by the sounding unit low

Symptoms

  • No warning tone where one would be expected, other warning chimes may also be silent
  • Airbag warning lamp on
  • Safety note: fallback warning missing; work on cluster and restraint wiring only de-energised (ignition off, battery off, wait time), specialist workshop

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B00D4

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication