OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00D3

Restraint System Malfunction Indicator 2

B00D3 refers to a second restraint malfunction indicator. No carmaker documents which lamp that is, so its meaning has to be inferred. One reading is a backup for the main lamp: the 1995 Saab 900 calls its SRS light warning lamp 1 and switches the central warning lamp on for good if that circuit fails. Saturn patented a similar fallback in 1991, using the seat belt lamp as second SIR indicator once a voltage check or photocell shows the airbag lamp is dead, flashing ten times and then glowing for ten minutes, or flashing constantly. Another reading is a separate telltale, since FMVSS 101 names a side air bag malfunction lamp besides the main airbag lamp. In either case B00D3 reports a fault in that second display circuit, not in the airbags themselves.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / D3

Possible causes

  • Open or shorted circuit to the second restraint indicator high
  • Second indicator lamp or LED failed medium
  • Restraint module or cluster configured for an indicator the vehicle does not have low

Symptoms

  • Airbag lamp on, second indicator dark or not doing its bulb check
  • Backup warning missing if the main airbag lamp also fails
  • Safety note: restraint warnings incomplete; work on cluster and wiring only de-energised (ignition off, battery off, wait time), specialist workshop only

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B00D3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication