OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00D2

Restraint System Malfunction Indicator 1

B00D2 means the restraint module has found a fault in the circuit of its primary warning lamp, the airbag or SRS light. FMVSS 208 S4.5.2 requires such a readiness indicator, watching its own readiness and within the driver's view, and FMVSS 101 lets it push other messages out of a shared display. No carmaker publishes B00D2. Saab shows what the check looks like under its own older numbers: on the 1998 9-3, B1227 is set when the lamp output reads above 5 V for 1.25 s, a short to positive that keeps the lamp from its 3 to 4 s bulb check, and B1228 when it reads below 1 V or above 10 kOhm while off, an open or short to ground that turns on the central warning lamp instead. Until fixed, the driver may not see further airbag faults.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / D2

Possible causes

  • Bulb or LED of the airbag warning lamp failed high
  • Lamp lead open, shorted to ground or to battery voltage, or loose cluster connector medium
  • Internal fault in the instrument cluster circuit board low

Symptoms

  • Airbag lamp does not come on for the bulb check at ignition-on, or stays on
  • A substitute warning such as a central warning lamp or a tone may appear
  • Safety note: airbag faults may go unnoticed; work on cluster and restraint wiring only de-energised (ignition off, battery off, wait time), specialist workshop only

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B00D2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication