OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00D1

Passenger Seat Belt Indicator

B00D1 covers the passenger seat belt warning. Unlike the driver warning, it only makes sense if the car knows the seat is occupied, so it leans on occupant sensing. No carmaker documents the code. Ford's 2014 F-150 uses the passenger sensing system to decide who gets Belt-Minder reminders: above 6 mph and after 1 to 2 minutes, lamp and chime come on for six seconds every 25 seconds for about five minutes. Honda's 2013 Fit lights the passenger warning about 6 s after ignition-on but not for a child or slight adult whom the weight sensors miss. Mazda saw the passenger warning come on for an empty seat holding a laptop or phone. FMVSS 208 S7.5 requires a passenger warning visible to the driver from September 2028. B00D1 points to the lamp side, not the buckle.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / D1

Possible causes

  • Open or shorted circuit to the passenger belt lamp or its display segment high
  • Lamp, LED or display unit for the passenger warning failed medium
  • Occupancy information missing or wrong, so the warning logic cannot run low

Symptoms

  • No passenger belt reminder, or a reminder for an empty seat
  • Airbag or restraint warning lamp may be on
  • Safety note: passenger may ride unbelted without warning; wiring work only de-energised (ignition off, battery off, wait time), specialist workshop

Inspection / repair

  • Difficulty: medium
  • DIY: shop recommended

What Pro shows you for B00D1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication