B00D0
Driver Seat Belt Indicator
B00D0 reports a fault in the driver's seat belt warning, meaning the lamp, its circuit or the output or message that drives it, not the buckle switch. No carmaker documents it publicly. The warning itself is mandatory: FMVSS 208 S7.3 asks at ignition-on for a 4 to 8 s chime plus a lamp for at least 60 s while the driver is unbelted, or a 4 to 8 s lamp with the chime tied to the unfastened belt; from September 2028 S7.5 keeps the lamp on as long as the belt is open and adds a second chime phase above 10 km/h. FMVSS 101 forbids cancelling the telltale early. UN R16 asks for a first visual stage of at least 4 s and a second, audible one of 30 s or more, starting by 25 km/h, 500 m or 60 s. With B00D0 the driver may get no reminder at all.
Possible causes
- Open or shorted lamp circuit or connector between restraint module and cluster high
- Warning lamp or LED in the instrument cluster failed medium
- Belt warning message not received by the cluster, for example after a cluster change without configuration low
Symptoms
- Driver belt warning lamp stays dark or stays on regardless of the belt
- Airbag or restraint warning lamp may be on
- Safety note: legally required warning missing; buckle up regardless, cluster and restraint wiring only de-energised (ignition off, battery off, wait time), specialist workshop
Inspection / repair
- Difficulty: medium
- DIY: shop recommended
What Pro shows you for B00D0
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.