B00CB
Passenger Seat Occupant Position Sensor E
B00CB is the fifth and last passenger seat occupant position sensor. No carmaker publishes it. Position alone is not always enough; an early patent of Automotive Technologies International, first filed in 1992, also wants the speed at which the occupant approaches the bag. It uses ultrasound bursts near 50 kHz, taking distance from the echo time and speed from the Doppler shift, or modulated infrared and radar, mounted in the headliner, on the mirror or on the airbag cover. In a 30 mph barrier crash it allows only about 8 ms of sensing for someone 9 inches away but 57 ms at 24 inches. FMVSS 208 lets the maker define the suppression zone that such sensors watch. Whether E denotes a velocity or a further distance sensor is not documented. B00CB lights the airbag lamp.
Possible causes
- Open or shorted lead to sensor E in the headliner, mirror base or dashboard high
- Transducer of sensor E faulty or covered medium
- Restraint module coded for a sensor the vehicle does not carry low
Symptoms
- Airbag warning lamp on
- Passenger airbag deploys without position-based suppression or staging
- Safety note: airbag system; disconnect sensors only de-energised (ignition off, battery off, wait time), check configuration after replacement, specialist workshop only
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B00CB
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.