OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00C9

Passenger Seat Occupant Position Sensor C

B00C9 names position sensor C of the passenger seat, and no carmaker lists it publicly. One concept for a third input watches the gap between torso and seat back: a patent first filed by Automotive Systems Laboratory in 1998, now with Joyson, pairs an electric field sensor in the cushion with a capacitive or radar proximity sensor in the back, aimed at the band about 10 to 18 inches above the cushion. While the torso rests within about 2 inches of the back the bag may fire; if it has been away by more than that for over 50 ms, the bag is disabled. If the back sensor keeps seeing someone the cushion sensor misses, the patent treats that as a fault. FMVSS 208 leaves the choice of such sensors to the maker. B00C9 lights the airbag lamp.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / C9

Possible causes

  • Lead to the seat back sensor broken at the hinge or after trim work high
  • Proximity sensor C faulty or its signal disagrees with the cushion sensor medium
  • Thick accessory covers or a wet seat back weakening the field signal low

Symptoms

  • Airbag warning lamp on
  • Airbag status lamp may change while the passenger leans forward
  • Safety note: airbag system; seat back and sensor only de-energised (ignition off, battery off, wait time), no third-party seat covers over sensors, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00C9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication