OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00C8

Passenger Seat Occupant Position Sensor B

B00C8 marks the second occupant position sensor of the passenger seat. No carmaker publishes it. A position input does not have to look at the person; it can come from how the load spreads over the seat. In a Honda application filed in 2002, a weight unit under each side of the seat carries four strain gauges in a bridge; comparing the front and rear gauge pairs shows whether the occupant sits on the front edge, and comparing the two sides shows a lean to left or right. FMVSS 208 accepts dynamic suppression for the passenger: the bag must already be suppressed when a 3- or 6-year-old dummy moves its head, neck or torso into a zone in front of the cover, a zone each maker defines for itself. Whether B means such a load-based signal is not documented. B00C8 brings on the airbag lamp.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / C8

Possible causes

  • Plug or lead to sensor B damaged when the seat was moved or removed high
  • Strain gauge bridge or position sensor B faulty, drifting with temperature medium
  • Seat frame mounted under tension, so the load split looks implausible low

Symptoms

  • Airbag warning lamp on
  • Passenger airbag may be suppressed or released without regard to sitting position
  • Safety note: airbag system; disconnect seat sensors only de-energised (ignition off, battery off, wait time), recalibrate after work on the seat, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00C8

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication