OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00C5

Passenger Seat Track Position Restraints Sensor

B00C5 reports a fault of the sensor that tells the restraint controller where the passenger seat sits on its rails. FCA uses the code with exactly this name. A 2022 STAR case for the 2021 Dodge Durango treats B00C5-13, circuit open, with the airbag lamp on: check the yellow 30-way plug I6634A under the passenger seat and make sure the seat track position return wire R730 is seated in cavity B11, using a pull-push-pull test. GPOP tips 68264880A and 9003579 for Dart, Cherokee and Chrysler 200 list B00C5-13 among codes to raise with engineering before an ORC is replaced, and ask for pins that are bent, corroded or opened up to be checked. Such sensors are usually two-wire Hall switches that change state when the rail passes.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / C5

Possible causes

  • Terminal pushed back or loose in the under-seat connector (FCA Durango, R730 return wire) high
  • Lead to the track sensor pinched or torn by the moving seat medium
  • Track position sensor faulty or its gap to the rail wrong after seat work medium
  • Restraint controller internal fault, only after wiring and sensor are ruled out low

Symptoms

  • Airbag warning lamp on
  • Passenger airbag deployment can no longer be adapted to the seat position
  • Safety note: airbag system; disconnect under-seat plugs only de-energised (ignition off, battery off, wait time), do not replace the restraint controller before checking pins, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00C5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication