OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00C1

Passenger Seat Occupant Classification Sensor B

B00C1 belongs to input B of the passenger seat classification. It is unpublished as such, but Toyota shows why a seat can carry several such sensors: on 2012–2013 Camry, Prius c and Yaris and 2013 Avalon, a left and a right weight detector sit between seat frame and rails. Their readings decide whether the passenger bag is armed, and they also serve as collision sensing. In campaign F0B (about 753,200 US cars) Toyota found that some seating habits or rough roads were taken for a rear impact, lighting the airbag lamp and AIR BAG OFF; dealers fitted new sensors, torqued them to 30 N·m, zeroed the system and verified its sensitivity. Whether B stands for such a right-hand cell is not documented. With B00C1 the airbag lamp is on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / C1

Possible causes

  • Load cell B damaged or drifting, for example after the seat was forced or dropped medium
  • Seat pan or sensor bolts fitted under tension or with the wrong torque, preloading the cell medium
  • Zero-point calibration not done after sensor or seat work medium
  • Poor contact at the plug of sensor B low

Symptoms

  • Airbag warning lamp on
  • Passenger airbag off lamp lit although an adult is seated
  • Safety note: passenger airbag status may be wrong; disconnect seat sensors only de-energised, keep tightening torques and run the zero-point calibration with the scan tool, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00C1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication