OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00C0

Passenger Seat Occupant Classification Sensor A

B00C0 flags the first of up to five classification inputs in the front passenger seat. Their job comes from FMVSS 208: the passenger bag must stay off when a 12-month dummy sits in a listed child restraint or a newborn dummy lies in a car bed, yet it must be live for a 5th percentile woman, and a yellow PASSENGER AIR BAG OFF lamp reports the suppressed state. Honda's 2013 Fit shows a typical weight solution: sensors in the seat switch the bag off at 29 kg or less, the off lamp may flicker when the load sits near that limit, and bags hanging from the seat back or a rear passenger pushing on it can upset the reading. No carmaker publishes B00C0, and which sensor the letter A names is left open. The airbag lamp lights and classification falls back to a safe default.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / C0

Possible causes

  • Loose plug or chafed wire to input A under the passenger seat, often after the seat was removed high
  • Classification sensor A itself delivers no or an implausible signal medium
  • Objects under the seat, items hanging on the seat back or pressure from the rear disturbing the measurement low

Symptoms

  • Airbag warning lamp on
  • Passenger airbag off lamp shows a state that does not match the occupant
  • Safety note: passenger airbag may be wrongly enabled or disabled; seat and sensor plugs only de-energised, recalibrate the classification after repairs, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00C0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication