OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00B9

Driver Seat Occupant Position Sensor C

B00B9 is the third occupant position sensor of the driver seat. No carmaker publishes it. A third input could judge posture from the seat back: a patent now held by Joyson places two electric field electrodes under the seat-back cover, one across the upper middle and inboard side and one along the outboard edge, and combines them with seat weight to block the side airbag when a small occupant leans into its path. Honda applied the same idea on the passenger side with OPDS sensors in the seat-back, which must be initialised after the cover or sensor is replaced and can be upset by a damp seat. Whether a driver seat uses the letter C for such an electrode is not documented. A stored B00B9 brings on the airbag lamp.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / B9

Possible causes

  • Seat-back cover or sensor replaced without initialisation high
  • Damaged seat-back harness or plug under the seat medium
  • Damp seat or accessory seat cover disturbing the electric field medium

Symptoms

  • Airbag warning lamp on
  • Side airbag suppression for leaning occupants unavailable
  • Safety note: airbag system with seat side airbag; disconnect seat plugs only de-energised; initialise/calibrate after sensor or cover replacement, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00B9

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication