OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00B5

Driver Seat Track Position Restraints Sensor

B00B5 reports a fault of the driver seat track position sensor, which tells the airbag module whether the seat is pushed far forward toward the steering wheel. FCA uses it with exactly this meaning: GPOP tech tips for the Dodge Dart (PF), Jeep Cherokee (KL) and Chrysler 200 (UF) name B00B5-13, an open circuit, among codes to clear with engineering before replacing the restraint controller, and a 2024 tip for the Pacifica and Voyager (RU) asks for wiring, plug and low voltage checks first. Allegro describes the usual hardware, a two-wire Hall switch that the steel track shields from a magnet as it passes, giving zones. Honda lowers driver airbag force in the forward zone. Saab 9-3/9-5 file this sensor as B0084 and then disable the second airbag stage. The airbag lamp lights.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / B5

Possible causes

  • Open circuit or bent/corroded pins in the seat harness to the track sensor (FCA subtype -13) high
  • Sensor loose or wrongly positioned on the seat track, so the Hall switch no longer sees the track edge medium
  • Low system voltage (FCA asks to check this before replacing the controller) low
  • Internal fault of the Hall-effect seat track sensor low

Symptoms

  • Airbag warning lamp on
  • Driver airbag may fire without seat position adjustment (e.g. second stage locked out)
  • Safety note: airbag system; unplug the seat and sensor connectors only de-energised; after replacing the sensor check its position output/calibration, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00B5

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication