B00B4
Driver Seat Occupant Classification Sensor E
B00B4 is the fifth and last driver seat classification sensor. No carmaker documents the code publicly. A fifth input need not weigh anything: IEE's BodySense uses capacitive sensing in the seat surface, placed over the heater mat, under the cover and on top of the foam, and tells a child restraint from a seated person whatever the belt tension, posture, weight or height; IEE says the vehicle maker does not have to calibrate it and that it serves the FMVSS 208 advanced airbag rules. Other designs add a belt tension sensor so that a tightly cinched child seat is not taken for a heavy adult. Whether E stands for such a field sensor, a mat or another load cell is the maker's decision. When B00B4 is stored, the airbag lamp is lit and that input is ignored.
Possible causes
- Open or poor contact in the seat harness or plug to input E high
- Damaged seat heater or trim where the capacitive electrode shares its layer medium
- Internal fault of the fifth classification sensor or its electronics low
Symptoms
- Airbag warning lamp on
- Possible related faults of the seat heater on the same seat
- Safety note: airbag system; work on seat and sensor plugs only de-energised; after replacing a sensor or trim follow the maker's calibration, specialist workshop only
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B00B4
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.