OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00B3

Driver Seat Occupant Classification Sensor D

B00B3 refers to the fourth of five driver seat classification inputs. No carmaker publishes it, and the mapping of letters to sensors is undocumented. A fourth input can rest on a different principle: Delphi patented a silicone-filled bladder between cushion foam and seat frame, carrying a pressure sensor and capacitive films whose spacing shrinks under load, so that weight and its spread over the cushion are estimated and cross-checked. Honda's job aid for its passenger seat weight sensors shows the service side: the sensors sit in the seat base or frame, need recalibration after a sensor or unit is replaced, and a binding sensor may be freed by loosening, shaking and retorquing the seat. Worn seat harnesses can also set such codes. A stored B00B3 lights the airbag lamp.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / B3

Possible causes

  • Seat harness worn by seat movement, open or intermittent contact to input D high
  • Sensor binding or preloaded in the seat structure medium
  • Recalibration not done after sensor or unit replacement medium
  • Internal fault of the sensor, e.g. leaking bladder or failed pressure cell low

Symptoms

  • Airbag warning lamp on
  • Classification of the driver unavailable for airbag staging
  • Safety note: airbag system; unplug seat and sensor connectors only de-energised (ignition off, battery off, wait time); recalibrate after any sensor change, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00B3

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication