OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00B2

Driver Seat Occupant Classification Sensor C

B00B2 is the third driver seat classification sensor in the J2012 list. No carmaker documents the code publicly. A widely used sensor type is Bosch's iBolt: the four bolts that anchor the seat frame are swapped for sensor bolts, a magnet and Hall element register how far a bending beam deflects, and the unit derives weight and how it is spread, separating an empty seat, a one-year-old, children of three and six, a 5th percentile woman and a 50th percentile man. A Bosch patent adds an accelerometer in the seat back that freezes the classification while jolts would distort the bolts' readings. Which bolt the letter C would denote is not published. With B00B2 stored, the airbag lamp is on and adaptive deployment cannot rely on that input.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / B2

Possible causes

  • Internal fault of the Hall-type sensor bolt at seat anchor C medium
  • Sensor bolt overloaded or seat frame bent, e.g. after a crash or wrong torque medium
  • Open or poor contact in the lead to input C medium

Symptoms

  • Airbag warning lamp on
  • Driver airbag cannot be matched to occupant size
  • Safety note: airbag system; disconnect seat and sensor plugs only de-energised (ignition off, battery off, wait time); calibrate weight sensors after replacement, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00B2

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication