B00B1
Driver Seat Occupant Classification Sensor B
B00B1 marks the second of the five driver seat classification sensors. No carmaker documents it publicly, and the letter is not tied to a fixed spot. Seat weight systems often measure at the corners: a CTS patent puts one thick-film strain gauge sensor at each corner between seat pan and slide rail, so the occupant's whole weight passes through four bridges whose leads meet in one junction box before the airbag controller. In such a layout every corner could carry its own letter, which would explain a series from A onward, yet no public source confirms that order. A stored B00B1 therefore means one load input is open, out of range or implausible; seat bolts fitted with the wrong torque and harness strain after seat removal are typical suspects. The airbag lamp lights.
Possible causes
- Seat refitted with wrong bolt torque or distorted mounting, loading the sensor unevenly high
- Strained or chafed lead to load input B under the seat medium
- Internal fault of the strain gauge sensor medium
Symptoms
- Airbag warning lamp on
- Weight-based adjustment of the driver airbag unavailable
- Safety note: airbag system; work on seat and sensor plugs only de-energised; calibrate the seat sensors after replacement or seat refitting, specialist workshop only
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B00B1
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.