OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00B0

Driver Seat Occupant Classification Sensor A

B00B0 is the first of five classification inputs on the driver seat. No carmaker publishes this code, and J2012 leaves it to the maker which sensor the letter A means. Classification normally sits in the passenger seat; a Bosch patent notes that it can be omitted on the driver side, on the assumption that drivers are adults, or fitted there as well. One sensor type that could fill such a slot is a switch mat under the cushion: Autoliv patented a mat with 28 dome switches grouped in five zones, chosen from a 2,016-cell test mat loaded with FMVSS 208 dummies and child seats at several back angles. If B00B0 is stored, the restraint module no longer trusts that input, so adaptive driver airbag staging may be lost, and the airbag lamp is on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / B0

Possible causes

  • Open or poor contact in the driver seat harness or plug to input A high
  • Cushion sensor mat creased or damaged, e.g. after seat cover work medium
  • Sensor or seat replaced without the required zero-point calibration low

Symptoms

  • Airbag warning lamp on
  • Driver airbag may deploy with a fixed instead of an adapted stage
  • Safety note: airbag system; unplug seat and sensor connectors only de-energised (ignition off, battery off, wait time); calibrate the sensor after replacement, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00B0

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication