OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B00A1

Occupant Position System

B00A1 covers the occupant position system, which watches where a person sits rather than how heavy they are, so that an airbag can be held back when someone is too close to it. FMVSS 208 accepts this as dynamic automatic suppression (DASS): the bag must be switched off before the occupant's head, neck or upper body reach a zone beside the cover that the maker defines. No carmaker publishes B00A1 itself. Honda's OPDS shows the idea: sensors in the passenger backrest report height and lean, the side airbag is switched off while a Side Airbag Off lamp is lit, and the system needs initialising after seat-back parts or the unit are changed. Patents describe other ways, such as ultrasonic beams from the headliner or a sensor at the airbag door. A fault lights the airbag lamp.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / A1

Possible causes

  • System not initialised after seat cover, seat-back sensor or control unit replacement high
  • Damaged seat harness or loose plug under the seat medium
  • Faulty position sensor or position control unit medium
  • Damp seat, accessory seat covers or objects disturbing the sensors low

Symptoms

  • Airbag warning lamp on
  • Airbag off indicator stays on although the occupant sits upright
  • Safety note: airbag system; disconnect seat and sensor plugs only de-energised; after a sensor or unit change initialise/calibrate the system, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B00A1

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication