OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B009E

Right Side Restraints Sensor 5

B009E stands for a fifth crash sensor on the vehicle's right flank. No carmaker documents this code publicly: Mitsubishi's airbag index ends its right row with the C-pillar unit B0098, and the NHTSA bulletin index shows no entry for B009E at all. A fifth right-hand sensor would mostly make sense on long bodies, vans with sliding doors or vehicles with extra seat rows. Two sensing principles are on offer: Bosch's peripheral pressure sensor sits in a door cavity and reacts when the crushed door raises the air pressure, while satellites such as Continental's gSAT pick up the shock in stiff structure. FMVSS 214 shows why several are needed, because a pole can hit the flank at many points. With B009E stored the airbag lamp is on and deployment near that sensor may come late.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 9E

Possible causes

  • Open, shorted or corroded line or plug to the fifth right sensor, often after door or trim work high
  • Internal fault of the fifth right crash sensor (pressure or acceleration type) medium
  • Airbag control unit coded for a sensor that the vehicle does not have low

Symptoms

  • Airbag warning lamp on
  • Side and curtain airbags on the right may react later in the area of that sensor
  • Safety note: airbag system; unplug sensors only with the ignition off, battery disconnected and wait time observed; after replacement have the configuration checked, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B009E

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication