OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B009D

Right Side Restraints Sensor 4

B009D opens the second half of the right-side sensor row, after B0096 to B0098. No carmaker documents this code publicly; Mitsubishi stops its right row at the C-pillar sensor B0098, and Honda's Fit and HR-V use only two side sensors per side. What a failing side satellite means in practice is shown by FCA recall 19V-449: on 2019 Jeep Cherokees the restraint controller could lose contact with acceleration sensors, which lit the airbag lamp and risked late or no deployment, so the sensors were replaced. Bosch's PSI5-linked SMA773 is an example of such a satellite, measuring two axes up to 60 g. A stored B009D therefore means the module has lost or rejected a fourth right sensor; its location comes from the maker's documentation. The airbag warning lamp stays lit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 9D

Possible causes

  • Communication with the fourth right sensor lost through wiring, plug or sensor fault high
  • Internal fault of the fourth right crash satellite medium
  • Airbag module coded for a sensor layout the vehicle does not have low

Symptoms

  • Airbag warning lamp on
  • Right side impact detection in the area of that sensor is weaker
  • Safety note: airbag system; disconnect the battery and keep the wait time before work on sensors, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B009D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication