OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B009B

Left Side Restraints Sensor 5

B009B names a fifth crash sensor on the left side. No carmaker documents this code publicly, and the reviewed bulletins and airbag indexes stop well before it. Why vehicles carry several side satellites at all follows from FMVSS 214: cars must protect occupants in a moving barrier crash and in a vehicle-to-pole test, and a narrow pole can strike anywhere along the side. Continental offers two kinds of satellites for this: the gSAT reports acceleration from rigid structure, the pSAT reacts to the pressure rise of a crushed door. A fifth left unit would most likely monitor a rear door or an extra seat row. When B009B is stored, the module has rejected that sensor's signal or circuit, and side or curtain airbags may react later on that side. The airbag lamp is lit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 9B

Possible causes

  • Line or connector fault on the way to the fifth left sensor high
  • Internal fault of the fifth left satellite (pressure or acceleration type) medium
  • Replacement sensor of the wrong part number after a body repair low

Symptoms

  • Airbag warning lamp on
  • Side and curtain airbags on the left may deploy later in a side impact
  • Safety note: airbag system; switch off, disconnect the battery and keep the wait time before work, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B009B

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication