B009A
Left Side Restraints Sensor 4
B009A extends the left-side sensor row past the three positions most cars use. No carmaker documents this code publicly. Mitsubishi's airbag index ends the left row at B0093 (C-pillar), and FCA numbers its pillar satellites in its own B276x range, so neither fills the fourth slot. A fourth left sensor makes sense on long bodies or extra seat rows: Bosch says its acceleration satellites can sit on sills, seat cross members, B- and C-pillars and also in the rear, while pressure sensors watch a door cavity. If a vehicle sets B009A, the airbag module has lost a plausible signal from that added satellite or found it shorted, open or wrongly configured; the matching subtype and location must be taken from the maker's own airbag documentation. The airbag lamp comes on.
Possible causes
- Damaged line or plug to the fourth left sensor, often after seat or trim removal high
- Internal fault of the fourth left crash satellite medium
- Airbag module coded for a sensor layout the vehicle does not have low
Symptoms
- Airbag warning lamp on
- Left side impact detection in the area of the missing sensor is weaker
- Safety note: airbag system; disconnect the battery and keep the wait time before any work on sensors or wiring, specialist workshop only
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B009A
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.