OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0097

Right Side Restraints Sensor 2

B0097 is the second right-side crash sensor. Mitsubishi fixes it at the right B-pillar, lists it as B-PILLAR SAT SEN RH and gives Right Side Restraints Sensor 2 as the J2012 name. Only subtype -55 appears there: the unit flags, after two seconds with the ignition on, that the stored configuration does not match the fitted sensors. Honda's request AER17060A confirms the numbering with B0097-87, meaning the second right side impact sensor has gone quiet on 2016–2017 Fit and HR-V cars. On a pillar an acceleration satellite is the usual choice; Bosch fits such units to B- and C-pillars, sills or seat cross members. Not every maker uses this code: FCA reports its right B-pillar acceleration sensor on the 2025 Ram 1500 as B2764, and Saab 9-3/9-5 use B0097 for the driver belt buckle switch circuit. While stored, the airbag lamp stays on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 97

Possible causes

  • Airbag unit configuration not matching the fitted sensors, e.g. after unit replacement (Mitsubishi subtype -55) high
  • Plug at the right B-pillar sensor loose or damaged after trim or seat belt work medium
  • Right B-pillar sensor sending no signal (Honda subtype -87) medium
  • On Saab 9-3/9-5, driver belt buckle switch circuit fault (different meaning) low

Symptoms

  • Airbag warning lamp on
  • Right side impacts near the B-pillar are detected only by the remaining sensors
  • Safety note: airbag system; disconnect the battery and keep the wait time before removing pillar trim, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0097

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication