OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0096

Right Side Restraints Sensor 1

B0096 concerns the first crash sensor on the right side, mirror image of B0091. Mitsubishi puts it in the right front door, calls it DOOR SATEL SENS RH and prints the J2012 title beside it; its airbag unit checks the sensor with the ignition on and, after two seconds, stores -11 for a ground short, -81 when data from the sensor stop and -55 for a configuration that does not fit the car, among nine subtypes in total. Honda logs B0096-87 when the first right side impact sensor of a 2016 or 2017 Fit or HR-V goes silent. A door position suits a pressure sensor: Bosch describes how a dent in the door changes the air pressure inside it, turning the whole door into the sensing element. Saab 9-3 and 9-5 models give B0096 to the passenger belt buckle switch circuit instead. The airbag lamp comes on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 96

Possible causes

  • Chafed wire or poor contact in the door harness between body and right front door high
  • Internal fault of the right front door satellite sensor medium
  • Airbag unit configuration not matching the vehicle (Mitsubishi subtype -55) low
  • On Saab 9-3/9-5, passenger belt buckle switch circuit fault (different meaning) low

Symptoms

  • Airbag warning lamp on, sometimes only after the right front door has been opened or worked on
  • Side and curtain airbags on the right may fire late in a side impact
  • Safety note: airbag system; disconnect the battery and keep the wait time before removing the door trim, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0096

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication