OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0095

Right Frontal Restraints Sensor

B0095 is the right-hand partner of B0090: an acceleration satellite in the right front crumple zone that lets the airbag module judge early how severe a frontal hit is. Honda's Fit and HR-V of model years 2016–2017 use the code this way, B0095-87 meaning the right front impact sensor sends nothing; in request AER17060A Honda asked dealers to report such cars before any repair. On the Ram 1500, FCA stores B0095-49 for an internal electronic failure of the right frontal acceleration sensor. STAR case S2408000050 traces repeat faults to a replacement sensor whose part number does not suit the restraint controller, and TSB 08-150-26 reprograms the controller on 2025 trucks. Mitsubishi once recalled Lancers because salty water could corrode the front impact sensors. With B0095 set, the airbag lamp is lit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 95

Possible causes

  • Replacement sensor part number not matching the restraint controller (FCA S2408000050) high
  • Water or road salt in the sensor housing or plug at the right front medium
  • Restraint controller software needing a reflash (FCA TSB 08-150-26) medium
  • Internal failure of the right front acceleration sensor low

Symptoms

  • Airbag warning lamp on, often after front-end repair
  • Frontal impacts on the right are judged later or less precisely
  • Safety note: airbag system; disconnect the battery and keep the wait time before touching the sensor, specialist workshop only

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0095

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication