OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0092

Left Side Restraints Sensor 2

B0092 belongs to the second crash sensor on the left side. Mitsubishi fits it at the left B-pillar and lists it as B-PILLAR SAT SEN LH, adding the J2012 title Left Side Restraints Sensor 2; its index shows only subtype -55, set two seconds after the unit finds that its stored configuration does not fit the vehicle. A pillar position suits an acceleration satellite: Bosch mounts these on stiff members such as sills, seat cross members or B- and C-pillars, and its SMA773 chip measures two axes up to 60 g and talks to the module over a two-wire PSI5 link. GM-built Saabs use the number differently: the 2006 9-5 and the 9-3 store B0092 for a general fault of the passenger presence system, with the airbag system then rated out of order. The airbag lamp is on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 92

Possible causes

  • Airbag unit configuration not matching the fitted sensors (Mitsubishi subtype -55) high
  • Loose or corroded plug at the B-pillar sensor after trim or body work medium
  • On GM-built Saabs, passenger presence system fault (different meaning) medium
  • Internal fault of the B-pillar satellite sensor low

Symptoms

  • Airbag warning lamp on
  • Left side impact detection rests on the remaining sensors only
  • Safety note: airbag system; disconnect the battery and keep the wait time before removing pillar trim, work at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0092

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication