OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0088

Third Row Right Seat Belt Load Limiter Deployment Control

B0088 closes the load limiter series with the right third-row seat. No manufacturer documents it with this meaning. If such a squib-switched limiter is fitted, the module tests its loop for opens, shorts and out-of-window resistance like any igniter; an Autoliv patent shows the principle, where gas from a squib releases a blocking ring so the softer torsion section takes over. Some designs avoid the extra loop altogether, such as the Delphi rear-seat retractor that switches mechanically. On GM Global A models (2011 Saab 9-4X) B0088 instead flags the right rear side impact sensor, using the same symptom bytes as its siblings: shorts, open or high resistance, low current, internal failure, wrong part fitted and invalid serial data. A stored code lights the airbag lamp.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 88

Possible causes

  • On GM vehicles, right rear side impact sensor or wiring faulty (different meaning) high
  • Harness to the right third-row seat strained by seat folding medium
  • Internal fault of the right third-row limiter squib low

Symptoms

  • Airbag warning lamp on
  • Right third-row belt cannot change its limiting level
  • Safety note: pyrotechnic restraint parts; work only de-energised at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0088

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication