B0087
Third Row Center Seat Belt Load Limiter Deployment Control
B0087 would flag the igniter circuit of an adaptive belt force limiter on the centre position of row three. That combination is close to theoretical: no carmaker documents the code, and NHTSA's 2013 study dates universal fitment of load limiters (by model year 2007) only for the front outboard seats. Joyson describes how such a unit works, with linear limiters tuned to a vehicle's crash pulse and dual-stage versions for adaptive or degressive force. On GM Global A vehicles (2011 Saab 9-4X) B0087 means the left rear side impact sensor. GM sets it after ten seconds of a fault, or when the module hears nothing from the sensor for over 375 ms. A history code there clears after 100 fault-free ignition cycles. Check the make first.
Possible causes
- On GM vehicles, left rear side impact sensor or its connector faulty (different meaning) high
- Damaged lead to a third-row centre limiter where fitted low
Symptoms
- Airbag warning lamp on
- On GM vehicles the AIR BAG indicator is lit by the cluster at the module's request
- Safety note: airbag system with pyrotechnic parts; diagnose only de-energised at a specialist workshop
Inspection / repair
- Difficulty: shop only
- DIY: shop recommended
What Pro shows you for B0087
Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.
- Repair cost (estimate)(visible in Pro mode)
- Labour time(visible in Pro mode)
- 3 affected components(visible in Pro mode)
See repair cost, labour time and components?
One key opens all tools by Fabian Brose.