OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0085

Second Row Right Seat Belt Load Limiter Deployment Control

B0085 points to the igniter circuit that would change the force level of the right rear belt. No maker documents it with that meaning. Joyson offers dual-stage limiters with degressive or adaptive behaviour, and an Autoliv patent switches from the stiff to the soft torsion section when the controller fires a squib once cabin deceleration crosses a threshold; in a rear seat such a loop would be watched like any other squib. IIHS rear-seat work found the right rear position tested less often than the left (16 against 27 runs). In practice, B0085 on a GM Global A car (Saab 9-4X 2011) is the left front side impact sensor, reported for shorts, opens, current above 23 mA, internal failure, a wrong part or invalid serial data. Only the make tells which part is meant.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 85

Possible causes

  • On GM vehicles, left front side impact sensor or its door wiring faulty (different meaning) high
  • Lead to the right rear retractor pinched by seat or trim medium
  • Internal fault of the right rear limiter squib low

Symptoms

  • Airbag warning lamp on
  • On GM vehicles the code clears from history only after 100 fault-free ignition cycles
  • Safety note: pyrotechnic restraint parts; work only de-energised at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0085

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication