OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0083

Second Row Left Seat Belt Load Limiter Deployment Control

B0083 is intended for a switchable force limiter on the left rear seat. No manufacturer publishes it with this J2012 meaning. Rear load limiters do exist: in an IIHS rear-seat test series presented in 2020, ten vehicles had both pretensioner and limiter at the back and one had a limiter alone. Much more often B0083 is a GM code for another part. On Global A models (2011 Saab 9-4X) it means the left front impact sensor, with symptom bytes for shorts, opens, low current, internal failure, wrong part and bad serial data; an open is flagged when the sensor stays silent longer than 375 ms. GM bulletin PI1480 (2015 Colorado/Canyon) traces stored B0083/B0084 with byte 05 to a corroded sensor or an unlatched connector lock. Saab 9-3 and 9-5 use it for the passenger seat position sensor.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 83

Possible causes

  • On GM vehicles, corroded left front impact sensor or unlatched connector lock (PI1480, different meaning) high
  • Wiring to the left rear retractor damaged under trim or seat medium
  • Internal fault of the rear load limiter squib low

Symptoms

  • Airbag warning lamp on, possibly only intermittently
  • Left rear belt keeps a fixed limiting level in a crash
  • Safety note: restraint system with pyrotechnic parts; work only de-energised at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0083

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication