OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0082

Passenger Seat Belt Load Limiter Deployment Control

B0082 covers the firing loop of the front passenger's switchable belt force limiter. Two manufacturers document this meaning. In the Mercedes A-Class, CLA and GLB, B008213 marks an interrupted igniter of the passenger-side belt force limiter. Ford special service message 51998 covers 2023 Escape, Corsair, Bronco Sport and Maverick that store B0082:1A because of the passenger belt retractor at connector C303B; where a connection fault is found, the retractor and pretensioner assembly is replaced before any wiring repair. Autoliv patents show why retractor and limiter belong together: the pretensioner's own gas can select the higher limiting level. On GM Global A cars (Saab 9-4X) B0082 means the seat belt reminder sensor in the passenger cushion instead. The airbag lamp stays on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 82

Possible causes

  • Poor connection at the passenger retractor plug (Ford C303B, SSM 51998) high
  • Raised resistance at the airbag module connector (Mercedes LI54.21-P-070658) medium
  • Internal fault of the passenger retractor and limiter assembly low

Symptoms

  • Airbag warning lamp on
  • Passenger belt cannot switch its force limiting level in a crash
  • Safety note: pyrotechnic retractor at the passenger B-pillar; work only de-energised (battery off, wait time) at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0082

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication