OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B007D

Second Row Center Seat Belt Pretensioner B Deployment Control

B007D names a second pretensioner at the middle seat of the second row. No carmaker documents it, and since even one pretensioner at the rear centre seat is uncommon, a second stage there is rarer still. Where such hardware is fitted, the B stage would act on the buckle or anchor side, comparable to the Autoliv pulley-and-cable buckle tensioner of patent US7360795B2 or the buckle units GM shows at the inner flank of front seats. Wiring to a rear centre position runs through the seat base or floor and can be disturbed when a split bench is folded or taken out. The firing loop is monitored like every other squib circuit. A stored B007D lights the airbag lamp, and the module treats that stage as unavailable.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 7D

Possible causes

  • Plug at the rear centre buckle or anchor tensioner loosened by folding the bench high
  • Airbag module coded for a rear centre B stage that is not present medium
  • Harness under the rear bench chafed or pinched low

Symptoms

  • Airbag warning lamp on
  • Rear centre occupant without the second pretensioning stage
  • Safety note: pyrotechnic belt hardware; de-energise the system (battery off, wait time) and have a specialist workshop do the work

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B007D

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication