OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B007A

Passenger Seat Belt Pretensioner B Deployment Control

B007A is the passenger-side twin of B0079 and covers the second pretensioner on the front passenger seat. Mercedes lists B007A13 for an open in the squib of the passenger's belt end fitting tensioner on the A-, CLA- and GLB-Class and keeps the passenger retractor apart as B007F. A lap or anchor pretensioner of this kind fires together with the retractor unit, as Joyson explains for its lap pretensioner, and draws the lap belt down onto the pelvis to cut the risk of sliding under it. Mitsubishi files comparable lap pretensioners under its own codes B1001 and B1002 rather than in J2012 slots, so B007A is not expected there. Once B007A is set, the airbag lamp comes on and the module records that the passenger's lap tensioning is unavailable.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 7A

Possible causes

  • Plug at the passenger end fitting tensioner disturbed, e.g. after seat removal high
  • Lead to the lap tensioner pinched under the passenger seat medium
  • Internal fault of the passenger lap tensioner low

Symptoms

  • Airbag warning lamp on
  • Passenger's lap belt not tightened in a crash, higher risk of sliding under it
  • Safety note: pyrotechnic tensioner next to the seat; disconnect the battery, observe the wait time, have a specialist workshop do the repair

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B007A

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication