OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0079

Driver Seat Belt Pretensioner B Deployment Control

B0079 marks the driver's second (B) pretensioner. Mercedes-Benz uses the code in exactly this way: in LI54.21-P-070658, valid for A-Class, CLA and GLB, B007913 is an open circuit in the squib of the belt end fitting tensioner on the driver's side, while the retractor of the same seat appears as B007E. An end fitting or anchor pretensioner pulls on the lower belt anchor next to the door side of the seat and so tightens the lap section; GM's restraint guide and a Hyundai-Kia patent describe this layout. Older Saab models give the number another meaning: the 2006 Saab 9-5 stores B0079 when an incorrect driver-side side-impact sensor is installed. A stored B0079 lights the airbag lamp and means the driver's lap tensioner may not fire.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 79

Possible causes

  • Plug at the driver's belt end fitting tensioner beside the seat loose or corroded high
  • Lead to the end fitting tensioner pinched by the seat rail medium
  • On a 2006 Saab 9-5, wrong side-impact sensor fitted (older GM meaning) low
  • Internal fault of the end fitting tensioner squib low

Symptoms

  • Airbag warning lamp on
  • Driver's lap belt section not tightened in a crash
  • Safety note: the end fitting tensioner is pyrotechnic; never probe it live – battery off, wait time, specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0079

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication