OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0078

Third Row Right Seat Belt Pretensioner Deployment Control

B0078 refers to the right seat of the third row and its belt pretensioner. No carmaker publishes B0078 in this J2012 sense, and Mercedes models with third-row tensioning retractors log the right-hand unit as B00E6 instead. Like B0077, the number has a sensor meaning in GM's older Saab modules: the 2006 Saab 9-5 sets B0078 for an open or short in the communication with the passenger-side side-impact sensor, and the 9-3 airbag module (2003, 2007) uses it for the passenger-side B-pillar sensor, with bytes for faulty communication, a short to battery or ground, or a wrong sensor fitted. Where the code really concerns the right pretensioner of the third row, the airbag lamp is on and that seat loses its pretensioning until the loop is repaired.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 78

Possible causes

  • On older Saab 9-3/9-5, fault at the passenger-side side-impact or B-pillar sensor (older GM meaning) high
  • Plug at the third-row right belt loosened when the seat was folded or removed medium
  • Internal fault of the third-row right pretensioner low

Symptoms

  • Airbag warning lamp on
  • Third-row right occupant without pretensioning, or on Saab impaired side-impact detection on the passenger side
  • Safety note: pyrotechnic restraint parts; only work on them with the battery disconnected, after the wait time, at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0078

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication