OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0077

Third Row Center Seat Belt Pretensioner Deployment Control

B0077 stands for the pretensioner at the middle seat of the third row. Hardly any vehicle fits one, and no manufacturer documents B0077 with this J2012 meaning; Mercedes, which equips some models with third-row tensioning retractors, lists only a left and a right unit (B00E7/B00E6). The number is met more often in older GM-built Saabs. The 2006 Saab 9-5 stores B0077 when the airbag module cannot communicate with the driver-side side-impact sensor because of an open or a short, and Saab 9-3 modules of 2003 and 2007 use it for the driver-side B-pillar sensor. On such cars the fault lies in the door or pillar sensor, not in a rear belt. For a genuine third-row centre pretensioner, a stored code means a lit airbag lamp and a disabled unit.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 77

Possible causes

  • On older Saab 9-3/9-5, fault at the driver-side side-impact or B-pillar sensor (older GM meaning) high
  • Plug of the third-row centre pretensioner disturbed during seat folding or removal medium
  • Airbag module coded for a centre pretensioner that is not installed low

Symptoms

  • Airbag warning lamp on
  • On Saab, side airbag deployment on the driver side may be impaired
  • Safety note: airbag sensors and pretensioners belong to the pyrotechnic restraint system; work only de-energised and at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0077

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication