OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0076

Third Row Left Seat Belt Pretensioner Deployment Control

B0076 belongs to the pretensioner at the left seat of the third row, a position found only in vehicles with a third seat row. No carmaker publishes B0076 with this meaning. Mercedes shows how third-row units are logged in practice: its LI54.21-P-070658 names open-circuit faults of the emergency tensioning retractors at the left and right of the third seat row as B00E7 and B00E6, the C-stage slots, so a B0076 is not to be expected on those models. The circuit itself is a pyrotechnic squib that the airbag module checks for opens, shorts and resistance drift, as with the front retractor and buckle units GM and NHTSA describe. If B0076 is stored, the airbag lamp is on and the third-row left occupant may not get any pretensioning.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 76

Possible causes

  • Plug at the third-row left belt disturbed by folding or removing the seat high
  • Harness damaged by luggage or trim work in the cargo area medium
  • Airbag module coded for a third-row pretensioner that is not fitted low

Symptoms

  • Airbag warning lamp on
  • Third-row left occupant without pretensioning in a crash
  • Safety note: pyrotechnic belt component; disconnect the battery and wait before touching it, repair at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0076

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication