OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0075

Second Row Right Seat Belt Pretensioner Deployment Control

B0075 is the right-hand counterpart of B0073: the pretensioner at the second row's right outer seat. Mitsubishi lists it as PRE-TEN REAR RH with the J2012 title and tests the circuit whenever the ignition is on; byte 11 stands for a short to ground and 13 for an open circuit, while further bytes cover shorts to power, crossed wires, high resistance or a configuration mismatch, each after 2 seconds. Toyota names B007512, a short to battery, in its 2022 Tundra bulletin about the Qi charger. Rear retractor wiring passes through seat and trim areas that are opened during interior work, which makes a disturbed plug the usual suspect. With the code active, the airbag lamp is on and the right rear passenger may not be pulled back into the seat in a crash.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 75

Possible causes

  • Plug at the right rear retractor not fully latched after interior work high
  • Chafed lead to the right rear pretensioner (short to ground or power) medium
  • Interference from added electronics, fixed by an ECU update (Toyota Tundra 2022) low
  • Internal fault of the right rear pretensioner low

Symptoms

  • Airbag warning lamp on
  • Right rear occupant without belt pretensioning in a crash
  • Safety note: the rear retractor contains a pyrotechnic charge; work on it only de-energised and leave it to a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0075

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication