OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0074

Second Row Center Seat Belt Pretensioner Deployment Control

B0074 would flag the firing loop of a pretensioner at the second row's middle seat. Rear centre belts with their own pretensioner are rare; IIHS rear-seat tests concentrate on the outboard positions, and no carmaker publishes B0074 with the J2012 meaning. The code is common in GM vehicles, but with an older meaning: the 2011 Saab 9-4X sets B0074 00/04 when the passenger presence module loses its seat sensor mat, GM's Impala bulletin PIE0485A (2015–2018) covers B0074-0D, and campaign N182188910 for the 2017 Buick Verano ties B0074 0D/0E to a pinched presence sensor wire that suppresses the passenger airbag. In a GM vehicle, B0074 therefore points to the front passenger seat sensing, not a rear belt. Where the code does mean a rear centre pretensioner, the airbag lamp is on and that unit is inactive.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 74

Possible causes

  • On GM vehicles, fault in the passenger presence sensor mat or its pinched wire (older GM meaning) high
  • Plug of the rear centre pretensioner disturbed when the bench is folded or removed medium
  • Open or short in the harness to the rear centre seat low

Symptoms

  • Airbag warning lamp on
  • On GM vehicles also passenger airbag status shows OFF with an adult seated
  • Safety note: restraint parts may be pyrotechnic or part of the airbag control; disconnect the battery, observe the wait time and use a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0074

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication