OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0073

Second Row Left Seat Belt Pretensioner Deployment Control

B0073 concerns the pretensioner at the left outer seat of the second row, normally built into the rear retractor. Mitsubishi documents it under exactly this name: with the ignition on, its airbag sensor unit stores B0073 with byte 11, 12, 13, 1A or 1B for a short to ground, a short to power, an open, lines shorted to each other or excessive resistance, and with byte 55 when the stored configuration does not match the vehicle; each fault must last 2 seconds. Toyota's Tundra bulletin T-SB-0057-22 lists B007311 and B007312. IIHS frontal tests with a dummy in the left rear seat show why such units are now spreading to the back row. GM uses the number differently: bulletin 22-NA-170 for the Equinox and Terrain links B0073 to water in the right front seat harness connector X320.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 73

Possible causes

  • Plug at the left rear retractor loose or damaged after trim or seat removal high
  • Harness to the left rear pretensioner shorted to ground or power medium
  • Airbag module configuration does not match the fitted rear pretensioners (Mitsubishi byte 55) low
  • Internal fault of the left rear pretensioner or of the airbag module low

Symptoms

  • Airbag warning lamp on
  • Left rear occupant gets no belt pretensioning in a crash
  • Safety note: pyrotechnic part in the rear retractor; work only with the system de-energised and preferably at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0073

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication