OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0071

First Row Center Seat Belt Pretensioner Deployment Control

B0071 is reserved for a pretensioner at the middle seat of the first row, which exists only where a three-person front bench is fitted. The airbag module would watch this squib like any other firing loop and flag an open, a short or a resistance outside its window. No carmaker publishes B0071 with this meaning. Mercedes-Benz does show that such a device can be present: its information LI54.21-P-070658 (A-, CLA-, GLB-Class) lists an open circuit at the emergency tensioning retractor in the centre of the first seat row, but files it under its own code B1B36. GM places buckle pretensioners at the inner flank of a front seat. In the airbag modules of the Saab 9-3 (2003, 2007), B0071 stands for a short in the passenger curtain or rollover-bar circuit, a different part altogether.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 71

Possible causes

  • Plug under the front bench centre seat loose or corroded high
  • Harness damaged when the centre seat or console is folded or removed medium
  • Airbag module configured for a centre pretensioner the vehicle does not have low
  • Internal fault of the centre pretensioner low

Symptoms

  • Airbag warning lamp on
  • Middle front occupant gets no belt pretensioning in a crash
  • Safety note: pyrotechnic component; disconnect the battery, wait the specified time and leave the work to a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0071

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication