OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0070

Driver Seat Belt Pretensioner A Deployment Control

B0070 covers the firing loop of the driver's first (A) belt pretensioner, the squib the airbag module ignites to take slack out of the belt in a crash. A short or open in that loop lets the module no longer count on the device, so it lights the airbag lamp. Toyota names the code in exactly this sense: its Tundra bulletin T-SB-0057-22 (model year 2022) lists B007011 (short to ground) and B007012 (short to battery), there triggered by the wireless Qi charger and cured by reprogramming the SRS ECU. J2012 does not fix which device is A; GM notes that a front seat may carry a retractor, buckle or anchor pretensioner, or more than one. Mitsubishi logs its front retractor units under its own codes B1029/B102A. Saab 9-3 airbag modules use B0070 for the passenger curtain loop instead.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 70

Possible causes

  • Loose or corroded plug at the driver pretensioner (B-pillar base or seat side) high
  • Firing lead chafed by seat rails or trim clips medium
  • Interference from added electronics, e.g. a wireless charger (Toyota Tundra 2022, ECU update) low
  • Internal fault in the pretensioner squib low

Symptoms

  • Airbag warning lamp on
  • Driver belt is not tightened in a crash; airbags themselves are usually unaffected
  • Safety note: the pretensioner is a pyrotechnic part; work on it only with the battery disconnected and the wait time observed, ideally at a specialist workshop

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0070

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication