OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0062

Knee Airbag Deployment Loop Short to Ground

None of the publicly available J2012 code lists contain B0062; they jump from B0061 to B0070, and no carmaker describes it with the knee airbag meaning shown in the title. J2012 files knee airbag loops under B0004 for the driver and B0013 for the passenger, with the fault type in the added byte; Mercedes-Benz logs kneebag squib faults as B000413 and B001313, and in that scheme a grounded loop would carry byte 11 instead. The only public use of B0062 is at Saab: 9-3 airbag modules (manuals of 2003 and 2007) store it for the driver-side curtain or rollover bar loop, with byte 04 for open and 0E for resistance too high. Knee airbags sit in the lower dash; an IIHS study of 414 crash tests found little overall benefit for belted drivers.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 62

Possible causes

  • Knee airbag lead chafed against a dash bracket or steering column part high
  • Damaged knee airbag connector after work under the dashboard medium
  • Saab 9-3: fault in the driver-side curtain or rollover bar loop instead low

Symptoms

  • Airbag warning lamp on
  • Knee airbag may stay inactive in a frontal crash
  • Safety note: knee airbag plugs sit under the dashboard; do not probe the circuit and only unplug them with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0062

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication