OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0061

Passenger Seat Belt Tension Sensor

B0061 covers the belt tension sensor of the front passenger seat, a key input for passenger occupant classification. FMVSS 208 lets carmakers meet the child-seat rules for advanced airbags by fitting a system that automatically switches the passenger airbag off for small occupants. A child seat strapped in tightly presses into the cushion and can look as heavy as an adult on the weight sensor; the tension sensor exposes that. Delphi's patent lets the occupant module subtract belt load from seat weight and suppress the airbag above a calibrated pull of about 30 lb, and the sensor reports out-of-range values as faults. No carmaker documents B0061 publicly with this meaning. Saab 9-3 modules use it for a low driver curtain loop resistance.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 61

Possible causes

  • Loose or corroded plug at the passenger belt tension sensor high
  • Tension sensor reading out of range or stuck medium
  • Input fault in the occupant classification or airbag module low

Symptoms

  • Airbag warning lamp on
  • Passenger airbag status indicator may show an unexpected on or off state
  • A tightly fastened child seat may not be recognised reliably
  • Safety note: the sensor plug sits beside the passenger seat near airbag and pretensioner plugs; only unplug it with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0061

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication