OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0060

Driver Seat Belt Tension Sensor

B0060 refers to a belt tension sensor in the driver's belt, a force gauge usually bolted to the lower anchor with the webbing running through it. In Delphi's design a spring-loaded slider moves against the belt pull and a Hall element between two magnets turns the travel into a voltage; the springs give way at roughly 5 to 15 lb. CTS, which calls itself the market leader, builds such sensors in several mounting styles. A second Delphi patent has the sensor report its value in 3-lb steps over a two-wire line and flag readings outside the valid band as a high or low fault. Tension sensing serves mainly the passenger seat; a driver-side unit is rare. No carmaker documents B0060 publicly; Saab's older airbag modules do not list it. Airbag lamp on.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 60

Possible causes

  • Loose or corroded connector at the anchor-mounted tension sensor high
  • Tension sensor output stuck or out of range, e.g. jammed slider medium
  • Sensor lead pinched under the seat or at the sill trim medium

Symptoms

  • Airbag warning lamp on
  • Restraint module may fall back to a default firing strategy for the driver
  • Safety note: the sensor plug sits beside the seat near pretensioner and side airbag plugs; only unplug it with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0060

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication