OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0057

Third Row Center Seat Belt Sensor

In J2012, B0057 is the buckle sensor for the third row's centre seat, a position found only in eight-seat vans and SUVs. FMVSS 208 S7.5(c) will require a belt warning there from September 2028. No carmaker documents B0057 publicly with this meaning. Older GM airbag modules give the number a different job: the 2006 Saab 9-5 and the Saab 9-3 store B0057 when the passenger pretensioner loop resistance stays under 1.5 ± 0.2 ohms for 2 seconds. GM bulletin 14609 lists B0057 with B0058, B0059 and B0064 to B0066 on 2004-09 Colorado and Canyon extended cabs, whose rear door harness can suffer fatigue breaks and can disable the front pretensioners; GM extended coverage to 10 years. On older GM vehicles, check the pretensioner loop first.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 57

Possible causes

  • Faulty buckle sensor or lead at the middle third-row seat medium
  • Older GM trucks: broken wire in the rear door harness to the pretensioner (bulletin 14609) medium
  • Older GM/Saab module: shorted passenger pretensioner squib or connector low

Symptoms

  • Airbag warning lamp on
  • Depending on the module: wrong belt status for the middle third-row seat, or passenger pretensioner possibly inactive
  • Safety note: buckle and pretensioner plugs carry firing circuits nearby; only unplug them with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0057

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 4 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication