OBD-II reference

All 9.533 generic OBD-II codes, explained in detail.

Causes, inspection steps and sources — a comprehensive DIY archive. Created and maintained with love for the detail. Good luck and have fun!

Body generic / SAE

B0056

Third Row Left Seat Belt Sensor

B0056 belongs to the left third-row seat's buckle sensor, found in larger SUVs, minivans and seven-seat estates. Third-row seats usually fold flat into the floor, so the buckle lead has to pass through the folding mechanism and is flexed every time the cargo area is extended. In Ford's patent for rear belt monitoring the third-row bench is the hard-wired part of the system, while only the removable second row needs a wireless link. FMVSS 208 S7.5(c) extends the rear belt warning to all rear rows for vehicles built from September 2028. A Hall switch that senses the latched tongue is the usual hardware. No carmaker documents B0056 with this wording publicly, nor does any service bulletin mention it; Mitsubishi's B0052 is the documented model for this fault type.

SystemBody
Typegeneric / SAE
GroupB0
Range / number– / 56

Possible causes

  • Buckle lead broken or chafed in the fold-flat mechanism of the third row high
  • Loose or corroded connector at the third-row seat medium
  • Faulty sensor in the left third-row buckle low

Symptoms

  • Airbag or rear belt warning lamp on
  • Fault may appear only with the third-row seat folded or raised
  • Safety note: third-row buckle plugs can sit near pretensioner wiring; only unplug them with the battery disconnected and the wait time observed

Inspection / repair

  • Difficulty: shop only
  • DIY: shop recommended

What Pro shows you for B0056

Before you go to the garage: roughly what the repair costs, how long it takes and which components are involved.

  • Repair cost (estimate)(visible in Pro mode)
  • Labour time(visible in Pro mode)
  • 3 affected components(visible in Pro mode)

See repair cost, labour time and components?

One key opens all tools by Fabian Brose.

Already have a key? · What is the workshop key?

Sources

References

How to read OBD-II codes

The first letter names the vehicle system, the second digit distinguishes generic from manufacturer-specific, the remaining digits group fault area and number.

PPowertrain: engine, transmission, emissions
BBody: chassis trim, comfort, interior
CChassis: suspension, brakes, steering
UNetwork: CAN, control modules, communication